• KAZUNA eTalk - App Guide & Discussion

aapost

aapost if they have an f019 hardware model, a firmware for an f019 would be preferable regardless of version.

He already tried doing the one on Kazuna's site, and is still within his brick.

aapost Running the edl rl command would pull the images without altering the phone, so there is no need to update or alter a phone that is working.

true. I was saying that I've had many experiences with many of these devices and I think the issues happen when flashing newer devices with the older firmware's on Kazuna's site. By the way, there is also a benefit of flashing the f119 firmware (1. Its factory Unlocked 2. its working with adb). but i guess its worth a try for me to pull my firmware, but its also worth a try for yours. lets both upload it.

    FliphoneBochur what is the full output after running edl rl your_dump_folder_name --genxml --loader=path/to/prog_emmc_firehose_8909.mbn?

    make sure your current working directory has a folder you want the files to go in to and that you replace your_dump_folder_name with the name of the folder, and make sure the path after = on loader points to the location where you saved the firehose file prog_emmc_firehose_8909.mbn.

      aapost

      C:\Users\Admin\Desktop\edl-master>py edl rl "C:\Users\tzvib\Desktop\Yoni Test" --genxml --loader=prog_emmc_firehose_8909.mbn
      No module named 'Crypto'
      Qualcomm Sahara / Firehose Client V3.60 (c) B.Kerler 2018-2022.
      main - Using loader prog_emmc_firehose_8909.mbn ...
      main - Waiting for the device
      main - Device detected :)
      
      C:\Users\Admin\Desktop\edl-master>

      (I put the loader in the edl folder, just clarifying, and if I try pip install crypto, it outputs this:

      Requirement already satisfied: crypto in c:\users\admin\appdata\local\programs\python\python311\lib\site-packages (1.4.1)
      Requirement already satisfied: Naked in c:\users\admin\appdata\local\programs\python\python311\lib\site-packages (from crypto) (0.1.32)
      Requirement already satisfied: shellescape in c:\users\admin\appdata\local\programs\python\python311\lib\site-packages (from crypto) (3.8.1)
      Requirement already satisfied: requests in c:\users\admin\appdata\local\programs\python\python311\lib\site-packages (from Naked->crypto) (2.28.2)
      Requirement already satisfied: pyyaml in c:\users\admin\appdata\local\programs\python\python311\lib\site-packages (from Naked->crypto) (6.0)
      Requirement already satisfied: charset-normalizer<4,>=2 in c:\users\admin\appdata\local\programs\python\python311\lib\site-packages (from requests->Naked->crypto) (3.0.1)
      Requirement already satisfied: idna<4,>=2.5 in c:\users\admin\appdata\local\programs\python\python311\lib\site-packages (from requests->Naked->crypto) (3.4)
      Requirement already satisfied: urllib3<1.27,>=1.21.1 in c:\users\admin\appdata\local\programs\python\python311\lib\site-packages (from requests->Naked->crypto) (1.26.14)
      Requirement already satisfied: certifi>=2017.4.17 in c:\users\admin\appdata\local\programs\python\python311\lib\site-packages (from requests->Naked->crypto) (2022.12.7)

      Biden2020prez That's what I've been using the whole time.

        FliphoneBochur

        Open QFIL and connect your device to your computer
        Select "Rawprogram0.xml" and "Patch0.xml" under "Programmer Path"
        Click on "Load XML" button
        Click on "Rawprogram0.xml" and then click on "Edit" button
        Locate the files that you want to exclude from the backup and delete them from the "Rawprogram0.xml" file
        Repeat step 5 for "Patch0.xml" file
        Click on "Save" button
        Click on "Download" button to start the firmware backup process

          FliphoneBochur try pip install pycryptodome, and for good measure pip install the rest of those listed in the requirements.txt

            aapost I tried pip install pylzma and I got a this megillah:

            C:\Users\Admin\Desktop\edl-master>pip install pylzma
            Collecting pylzma
              Using cached pylzma-0.5.0.tar.gz (4.2 MB)
              Preparing metadata (setup.py) ... done
            Building wheels for collected packages: pylzma
              Building wheel for pylzma (setup.py) ... error
              error: subprocess-exited-with-error
            
              × python setup.py bdist_wheel did not run successfully.
              │ exit code: 1
              ╰─> [10 lines of output]
                  running bdist_wheel
                  running build
                  running build_py
                  creating build
                  creating build\lib.win-amd64-cpython-311
                  copying py7zlib.py -> build\lib.win-amd64-cpython-311
                  running build_ext
                  adding support for multithreaded compression
                  building 'pylzma' extension
                  error: Microsoft Visual C++ 14.0 or greater is required. Get it with "Microsoft C++ Build Tools": https://visualstudio.microsoft.com/visual-cpp-build-tools/
                  [end of output]
            
              note: This error originates from a subprocess, and is likely not a problem with pip.
              ERROR: Failed building wheel for pylzma
              Running setup.py clean for pylzma
            Failed to build pylzma
            Installing collected packages: pylzma
              Running setup.py install for pylzma ... error
              error: subprocess-exited-with-error
            
              × Running setup.py install for pylzma did not run successfully.
              │ exit code: 1
              ╰─> [12 lines of output]
                  running install
                  C:\Users\Admin\AppData\Local\Programs\Python\Python311\Lib\site-packages\setuptools\command\install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
                    warnings.warn(
                  running build
                  running build_py
                  creating build
                  creating build\lib.win-amd64-cpython-311
                  copying py7zlib.py -> build\lib.win-amd64-cpython-311
                  running build_ext
                  adding support for multithreaded compression
                  building 'pylzma' extension
                  error: Microsoft Visual C++ 14.0 or greater is required. Get it with "Microsoft C++ Build Tools": https://visualstudio.microsoft.com/visual-cpp-build-tools/
                  [end of output]
            
              note: This error originates from a subprocess, and is likely not a problem with pip.
            error: legacy-install-failure
            
            × Encountered error while trying to install package.
            ╰─> pylzma
            
            note: This is an issue with the package mentioned above, not pip.
            hint: See above for output from the failure.

            I tried running the backup command again and I got the exact same output as before:

            No module named 'Crypto'
            Qualcomm Sahara / Firehose Client V3.60 (c) B.Kerler 2018-2022.
            main - Using loader prog_emmc_firehose_8909.mbn ...
            main - Waiting for the device
            main - Device detected :)

              FliphoneBochur Yeah.. looks like some OS specific needs again, trying to compile something and it needs some tools for building installed. Try to see if you can find what it is asking for and then run the command again after installing it.

              The deprecation warning part should be ignore-able.

              FliphoneBochur you can also try running pip install pycryptodome first just to try to get that module message out of the way. You will likely still need you to go back and install the rest of them though.

              FliphoneBochur error: Microsoft Visual C++ 14.0 or greater is required. Get it with "Microsoft C++ Build Tools": [Login to see the link]

              if you install Microsoft Visual C++ 14.0 or greater, seems u wont have an issue, according to the error message.

              lgexalter1 just to break that down,
              the pip install -r requirements.txt does the same thing as installing them 1 by 1, but all at once. Sometimes it is clearer what module is having issues when you go 1 by 1.

              The other command you can give a go, couldn't hurt, but I think it only loads the Loaders repository, and you already have the firehose set up and it seems to see it, so i think you are likely already good there.

              git submodule update --init --recursive
              Submodule 'Loaders' (https://github.com/bkerler/Loaders) registered for path 'Loaders'
              Cloning into '/edl/Loaders'...
              Submodule path 'Loaders': checked out 'b39741a9b96160755b963819d52dfe589f7a3a62'

              I'm at the same stage [Login to see the link] is, except I own a F119 variant, and just tried reflashing it with kazuna's fw from their update endpoint.

              The phone "is there" aka, if you manage to skip setup wizard and all that fuss, the underlying is working, it looks like they might have botched something in the file they are serving (or QFIL is doing some kind of damage) kernel wise, because to me, it just looks like a bad display driver.

              If anyone has a F119 dump, even just boot.img only, I'd be grateful

              I'm just waiting for someone to send anything. Anything that could get the phone to work. If it remains a brick it won't be the worst thing ever because I backed up his files and I have a spare phone, but I'd rather unbrick it.
              If [Login to see the link], [Login to see the link], or anybody else who has the firmware would be able to send it, I'd really appreciate it. Thanks!

              Meh, managed to restore F119 from a QFIL backup from the same device.
              I've started messing with it because I manage to get the debugging opts, but not the authorization dialog, so it remains unauthorized.

              Build no. F119_R035