hi is it possible to replace the charging port on a kyocera e4810 or i would have to swap the whole board? if its possible, how would i do it?
kyocera e4810 repair
YyerushivishLevel 1 - Junior Member
try 347-598-8428. he lives in lkwd and just fixed my charging port on lg exalt for relatively cheap price
FlippyLevel 6 - Platinum Elite Member
Anecdotally I noticed that the price for repair on these durable phones are much higher
yerushivish Flippy is there anyway to repair this myself? or its not an easy repair?
JjackLevel 3 - Gold Member
MacherCentral It shouldn't be harder than any other phone, but I've had trouble finding parts.
jack i have the parts already, i just cant figure out how to take off the housing. do you know how to do this?
JjackLevel 3 - Gold Member
MacherCentral DO AT YOUR OWN RISK. BE CAREFUL NOT TO BRAKE ANYTHING! First unscrew all the screws. Then on top of the battery compartment there are 2 tabs. Push then down gently (you may also need to play with the tabs in the holes at the top) the top part should pop out. Then open the flap covering the charging port. Then gently pop out the plastic piece that goes around the top of the phone. Then carefully push out the bottom piece. Unscrew the rest. Gently remove the top plastic where the keypad is, push the appropriate tabs. Then remove the bottom. Keep going until you could access the charging port.(I didn't go further because I only needed the keypad)
jack ok i will see if this will work for me, Thank you!