Thank you @neutronscott for making this possible! Thank you @lgexalter1 and @Biden2020prez and @yeti and @sdmde for helping me figure out different things about this phone. If anyone has any other ROMs they would like to add to this list please email me at t408dl@gmail.com Prerequisites: ADB , Auto Booter , MTK Drivers , ( Fastboot Drivers ), brains. Warning you are flashing custom firmware and can potentially brick your device! This process will delete everything on your device and there is no way around this! Make sure you are choosing a ROM that is for your specific device! 1. Setup: Download and install all of the prerequisites listed above Download a ROM from the list below and extract the super.bin Download VBmeta files and extract them Place all your files in the ADB folder 2. Unlocking bootloader and disabling AVB: Run Auto Booter Plug in your phone into the computer while it is powered off Once your phone screen says: =>FASTBOOT mode... on it run in adb: fastboot flashing unlock Press 'volume +' key to unlock the bootloader Once bootloader is unlocked run the following codes to disable avb: fastboot flash --disable-verity --disable-verification vbmeta vbmeta.bin fastboot flash --disable-verity --disable-verification vbmeta_system vbmeta_system.bin fastboot flash --disable-verity --disable-verification vbmeta_vendor vbmeta_vendor.bin 2.5 Flash Boot.bin for Roms with apps that need a cursor Download this boot.bin : Run: fastboot flash boot boot.bin 3. Flash Super While phone is still in fastboot mode run: fastboot reboot fastboot When the phone is back in fastbootd mode run: fastboot flash super super.bin (If you see "Invalid sparse file format at header magic" you can ignore it safely.) Once completed, to restart your device run: fastboot reboot You now have a kosher rom! Here are links to ROMS: THESE ROMS DO NOT ALLOW APP INSTALLATION (Even if you try the methods posted on the other thread!) Tested on t408dl, 4058E and 4058L: Talk Only Removes: Browser, Texting, Email, Gallery, Camera, Music, Recorder. Talk Only-Basic : Removes: Browser, Texting, Email, Video. Talk Only-With Apps Op 3 : Removes: Texting, Browser, Video , Email, and Hotspot. Includes: Waze, Weather, and Siddur. Talk&Text : Removes: Browser and Email. Includes: Voice Access. Talk&Text-NO Video : Removes: Browser, Video, and Email. Includes: Voice Access. Talk&Text-With Apps Op 1 : Removes: Browser, Video, Email, and Hotspot. Includes: Waze, Weather, and Siddur. Talk&Text-With Apps Op 2 : Removes: Browser. Includes: Waze, Weather, Siddur, and Hotspot. I will be posting more as I make them If you previously installed my mouse boot.img and you are updating to a newer version of my rom you should update to this boot.img as it is the one that goes along with my updated rom. Helpful Tips: To set up Voice Access: Go to notifications, activate VoiceAccess by clicking on the VoiceAccess notification, say: "Open voice Access Settings", once in settings you can go to 'configure activation key', then to 'activation key', click on the key you want to set (quick dial on back of phone or message shortcut), say: "touch ok", you should be all set! Also in settings you can toggle 'Activation button' to turn off the on screen button. To toggle mouse press the favorites key (star icon). When mouse is on keys 7 and 9 scroll up, and keys * and # scroll down, key 3 opens options/right clicks. Once deactivated the mouse icon remains on screen for around 10 seconds.

Updating Roms Here is a guide for updating Roms. This means you already installed one of darth Kosher Roms, and want to switch to a different one. If you follow these steps you shouldn't lose your data. This guide assumes you already did all the steps to install a kosher Rom, and you are working on the same computer (so you already installed mtk drivers, flashed vbmeta, unlocked bootloader, know how to use fastboot, etc) Step By Step Instructions: Download the rom of your choice from the top post on this thread ( darth ). (make sure its named super.bin - I didn't check all them). You should probably download this boot.bin because you might have an old one. Run fastboot flash boot boot.bin to flash it. Run fastboot reboot fastboot , and wait for your phone to boot to the screen that says "Android Fastboot" among other information. Run fastboot flash super super.bin . When it finishes flashing super, run fastboot reboot , or press "reboot system now" on the phone. Great Job! All Done!

darth Thanks, the more clear we can be on providing instructions, the less questions we'll have to field (hopefully). Too bad you can't provide a link to brains... 😆

Techgen I don't think we should spend too much time on instructions because hopefully we will have a kosher firmware which will be preferable.

Biden2020prez True. BTW I just looked on Amazon, and it seems like its sold out 😦 EDIT: Just got one on ebay

Techgen A few frum cell phone store owners said they are going to start stocking up on the tcl flip 2 now that a good free kosher option looks doable. I’m not sure if that’s why Amazon’s out of stock but you never know. I plan on working on a simple thorough guide for the main apps4flip site but I plan on waiting until we have the full kosher rom to do it so I don’t have to write the guide up twice

What happens when you initiate recovery mode?

chaimzalman Want to explain your question?

Biden2020prez if you remove the browser you can still reset the phone?

Yes. We are working on a way to allow Factory reset but keep browser removed.

Darth your link for drivers was removed because of violation of google drive terms. I had the same issue when i uploaded. Try putting it in a zip

Instructions for installing a kosher ROM on TCL Flip2/Classic T408DL

samwbed

Biden2020prez so am i supposed to extract the boot.zip into the adb folder. Also do i have to do it before i install the filter. or can i do it after, and if yes what command would i use.

Biden2020prez

samwbed correct, ADB folder. you can do it after installing the filter.

the top post has the command

samwbed

Biden2020prez after installing the filter i extracted the boot.bin and ran the fastboot flash boot boot.bin comnd but still no mouse when i click favrts. .someone told me to try adb shell getprop usr.rom.ver but that didnt help either, it says adb.exe no device emulator found. when i press favorites it just opens favorites. now what

COMPROT

hello how do i setup voice access thanks

darth

COMPROT darth Look at the end of the post.

COMPROT

darth thanks I meant to ask where to I found the voice access at all when I go to notification I don't see nothing about voice access thanks for your help

COMPROT

darth I'm now using talk and text without video version 1.2 and when I'm running the adb command I'm getting "Error: Requires permission not exported from uid 10069" any advice thanks

ChaseChiller

Is this true that once you install a kosher rom it's not possible to make it install apps again , even with reflashing? Because I don't want to be able to remove the kosher rom.

COMPROT

did someone had success using voice access with the kosher rom? thanks

COMPROT

thanks for replying i did it but i got an error when trying to run "adb shell am startservice com.google.android.apps.accessibility.voiceaccess/com.google.android.apps.accessibility.voiceaccess.JustSpeakService "Error: Requires permission not exported from uid 10069. maybe something is wrong with this command or i need to do something in the phone? thanks for your help

darth

COMPROT Try adb shell settings put secure enabled_accessibility_services com.google.android.apps.accessibility.voiceaccess/com.google.android.apps.accessibility.voiceaccess.JustSpeakService

adb shell am startservice com.google.android.apps.accessibility.voiceaccess/com.google.android.apps.accessibility.voiceaccess.JustSpeakService

Biden2020prez

samwbed which filter do you have?

samwbed

Biden2020prez im using the rom of talk and text with apps (waze, weather, siddur) i downloaded from this page [Login to see the link] . (is the one on this forum an updated version. will that make a diffirence?)

Biden2020prez

samwbed the one on forum might be better or more updated

samwbed

Biden2020prez it worked! how do i set gps permissions for an app like waze. for some reason it didnt pop up when i first opened it and now there is no gps signal

COMPROT

darth thanks a billion darth this one worked

COMPROT

darth hello are you planning to add a Hebrew keyboard? thanks

samwbed

so i installed the talk and text with apps op1. so now if i by mistake press number 3 key while im am in "cursor" mode i wont be able to click anything with the mouse unless i restart the phone also i cant dial the numbers 9, 7, #, and*(the cursor moves with the arrow keys) while in that mode. how do i fix this

Biden2020prez

samwbed not sure what the issue is, but why dont u just restart the phone?

darth

samwbed Look at instructions in first post for how to use mouse mode. It explains what each key does.

samwbed

darth this is what it said in the first post "When mouse is on keys 7 and 9 scroll up, and keys * and # scroll down, key 3 opens options/right clicks" problem is by me the mouse only moves when i press the main arrow buttons. and like i said, the 7 9 #* dont move the mouse at all(i cant dial them either. just nothing happens). and the 3 somehow deactivates the ability to click. where did i mess up. (waze also doesnt work properly. dont know if thats connected, just throwing it out there)

« Previous Page Next Page »